hey.
Griff's Garage
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
brain go brrrrrr
Not saying there aren't others here, but in this instance, just defending the call out on dropping thousands in maintenance into 90s GM shitboxes.
Your perseverance with the now unreliable


- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex

I've lived the

I'll fix the


brain go brrrrrr
#metooBig Brain Bradley wrote: ↑Wed Mar 11, 2020 10:03 am![]()
I've lived thelife and have seen the light. Everything we bought in the garage right now was bought pretty well used, except the motorcycle that was bought pretty well depreciated even though it was nice/low miles.
I'll fix theand continue to
my cars along until the wheels fall off... at least until I relocate. even then we will buy used things.

I like what I have... doubt I'll see any change this year, could possibly off the Beemah but I am not sure it's worth it yet.
New

- Desertbreh
- Command Chief Master Sirloin
- Posts: 18468
- Joined: Thu Nov 03, 2016 11:31 am
- Location: Beyond Thunderdome
- max225
- Chief Master Sirloin of the Wasteful Steak
- Posts: 46952
- Joined: Thu Nov 03, 2016 12:49 am
- Drives: Bavarian lemon
One can look at it as an "attack" or one could look at it as a compliment to keeping something on the road for that long.
I have maintained a 1998 250k mile crown vic to 410k miles, over the last 5 years... and it was worth 0 at 250k. So no one is throwing hands here. Panties in a bunch squad all worked up.
I have maintained a 1998 250k mile crown vic to 410k miles, over the last 5 years... and it was worth 0 at 250k. So no one is throwing hands here. Panties in a bunch squad all worked up.
Last edited by max225 on Wed Mar 11, 2020 1:45 pm, edited 1 time in total.
Mine is an '03 as well... but both platforms launched in the 90s, complete with massive fisher price radio buttons and rubber dash boards. Oddly enough I think the leather quality on my C5 seats is some of the best I've experienced. Still awful seats

This is DFD, panties are all perpetually bunchedmax225 wrote: ↑Wed Mar 11, 2020 1:31 pm One can look at it as an "attack" or one could look at it as a compliment to keeping something on the road for that long.
I have maintained a 250k mile crown vic to 410k miles, over the last 5 years... and it was was 0 at 250k. So no one is throwing hands here. Panties in a bunch squad all worked up.

- CaleDeRoo
- Senior Master Sirloin
- Posts: 9222
- Joined: Tue Nov 13, 2018 8:46 pm
- Drives: C5
- Location: CLT NC
You have until all star weekend to decide if you'll sell me those seats

- CaleDeRoo
- Senior Master Sirloin
- Posts: 9222
- Joined: Tue Nov 13, 2018 8:46 pm
- Drives: C5
- Location: CLT NC
We will

- Apex
- Chief Master Sirloin of the Wasteful Steak
- Posts: 29815
- Joined: Wed Nov 02, 2016 10:36 pm
- Drives: Abominable
- Location: NJ
Cherry low-mileage wax queen C6s should be dropping in value as the boomers drop.[user not found] wrote: ↑Wed Mar 11, 2020 6:46 pmBoomers are dying in record numbers thanks to Corona Extra - no sense inthe
![]()
- Apex
- Chief Master Sirloin of the Wasteful Steak
- Posts: 29815
- Joined: Wed Nov 02, 2016 10:36 pm
- Drives: Abominable
- Location: NJ

Be the lymes disease to their coronavirus.
- max225
- Chief Master Sirloin of the Wasteful Steak
- Posts: 46952
- Joined: Thu Nov 03, 2016 12:49 am
- Drives: Bavarian lemon
They are not dropping because they didn't sell many...

- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 41718
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Dadmobile
- Location: Not quite Philly
Better sell your New Balance stock. After this there won’t be anyone left to buy their white shoes.[user not found] wrote: ↑Wed Mar 11, 2020 6:46 pmBoomers are dying in record numbers thanks to Corona Extra - no sense inthe
![]()
No real interest in[user not found] wrote: ↑Wed Mar 11, 2020 6:46 pmBoomers are dying in record numbers thanks to Corona Extra - no sense inthe
![]()


Well, made some better progress on the
this weekend.
I got the power steering cooler installed. It wasn't easy but not as bad as some internet bros made it out to be. Hardest part was removing the hard line of the stock piping that goes into the pump.It was on there tight as hell and pretty hard to access, fortunately once all of the front suspension was off, it was easier.
I have all of the control arms removed to take somewhere to replace the ball joints.
Redid all of the under hood grounds... I chopped off those stupid connector things and just soldered them all into a normal ground eyelet.
Cleaned engine bay, wheel wells, suspension, etc.
I still need to change the oil and trans fluid, put all the suspension back together, rebuild calipers (need to figure out access to an air compressor), replace the OPS again, maybe the wiring there too. Also need to detail the car, get an alignment, then get new
and it should be ready to go.

I got the power steering cooler installed. It wasn't easy but not as bad as some internet bros made it out to be. Hardest part was removing the hard line of the stock piping that goes into the pump.It was on there tight as hell and pretty hard to access, fortunately once all of the front suspension was off, it was easier.
I have all of the control arms removed to take somewhere to replace the ball joints.
Redid all of the under hood grounds... I chopped off those stupid connector things and just soldered them all into a normal ground eyelet.
Cleaned engine bay, wheel wells, suspension, etc.
I still need to change the oil and trans fluid, put all the suspension back together, rebuild calipers (need to figure out access to an air compressor), replace the OPS again, maybe the wiring there too. Also need to detail the car, get an alignment, then get new

- ChrisoftheNorth
- Moderator
- Posts: 47343
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: X5, Bison
An air compressor is a pretty handy thing to have around. I bought this one from Harbor Freight 6 years ago and it's been flawless. Had enough balls to rebuild all my C5 calipers without even needing to run. It's also powerful enough to run an air ratchet or impact, which can come in handy more than you'd expect. I also use it for house projects where I need air nailers or the like. Super handy.D Griff wrote: ↑Mon Mar 23, 2020 8:49 am Well, made some better progress on thethis weekend.
I got the power steering cooler installed. It wasn't easy but not as bad as some internet bros made it out to be. Hardest part was removing the hard line of the stock piping that goes into the pump.It was on there tight as hell and pretty hard to access, fortunately once all of the front suspension was off, it was easier.
I have all of the control arms removed to take somewhere to replace the ball joints.
Redid all of the under hood grounds... I chopped off those stupid connector things and just soldered them all into a normal ground eyelet.
Cleaned engine bay, wheel wells, suspension, etc.
I still need to change the oil and trans fluid, put all the suspension back together, rebuild calipers (need to figure out access to an air compressor), replace the OPS again, maybe the wiring there too. Also need to detail the car, get an alignment, then get newand it should be ready to go.
https://www.harborfreight.com/air-tools ... 61454.html
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
yes, but if he doesn't have air tools I'd recommend going electric at this point. my dad, a pro mechanic, has made the switch.Detroit wrote: ↑Mon Mar 23, 2020 8:56 amAn air compressor is a pretty handy thing to have around. I bought this one from Harbor Freight 6 years ago and it's been flawless. Had enough balls to rebuild all my C5 calipers without even needing to run. It's also powerful enough to run an air ratchet or impact, which can come in handy more than you'd expect. I also use it for house projects where I need air nailers or the like. Super handy.D Griff wrote: ↑Mon Mar 23, 2020 8:49 am Well, made some better progress on thethis weekend.
I got the power steering cooler installed. It wasn't easy but not as bad as some internet bros made it out to be. Hardest part was removing the hard line of the stock piping that goes into the pump.It was on there tight as hell and pretty hard to access, fortunately once all of the front suspension was off, it was easier.
I have all of the control arms removed to take somewhere to replace the ball joints.
Redid all of the under hood grounds... I chopped off those stupid connector things and just soldered them all into a normal ground eyelet.
Cleaned engine bay, wheel wells, suspension, etc.
I still need to change the oil and trans fluid, put all the suspension back together, rebuild calipers (need to figure out access to an air compressor), replace the OPS again, maybe the wiring there too. Also need to detail the car, get an alignment, then get newand it should be ready to go.
https://www.harborfreight.com/air-tools ... 61454.html
brain go brrrrrr
- ChrisoftheNorth
- Moderator
- Posts: 47343
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: X5, Bison
No shit? I've never met an electric tool I like as much as an air tool. There must have been a lot of progress in that regard recently.Big Brain Bradley wrote: ↑Mon Mar 23, 2020 9:14 amyes, but if he doesn't have air tools I'd recommend going electric at this point. my dad, a pro mechanic, has made the switch.Detroit wrote: ↑Mon Mar 23, 2020 8:56 am
An air compressor is a pretty handy thing to have around. I bought this one from Harbor Freight 6 years ago and it's been flawless. Had enough balls to rebuild all my C5 calipers without even needing to run. It's also powerful enough to run an air ratchet or impact, which can come in handy more than you'd expect. I also use it for house projects where I need air nailers or the like. Super handy.
https://www.harborfreight.com/air-tools ... 61454.html
Still doesn't fix the occasional need for compressed air (rebuilding calipers)...but it would be more convenient than storing a compressor that might be used once a month.
I've thought about it... don't mind the cost but it's more the storage. We have an 1100 square foot house, a shed, and a storage room on the back of the house. I have an extra set of wheels, tools, floor jacks, stands, detailing supplies, two bicycles, kayaks, camping shit, lawn shit... Both storage areas are pretty full of stuff already after living here for two months, and it is like 30% mutual stuff, like lawn things, 60% my stuff, 10% her stuff, so I don't want to add to that something I don't need and would have to wheel out from a shed every time.Detroit wrote: ↑Mon Mar 23, 2020 8:56 amAn air compressor is a pretty handy thing to have around. I bought this one from Harbor Freight 6 years ago and it's been flawless. Had enough balls to rebuild all my C5 calipers without even needing to run. It's also powerful enough to run an air ratchet or impact, which can come in handy more than you'd expect. I also use it for house projects where I need air nailers or the like. Super handy.D Griff wrote: ↑Mon Mar 23, 2020 8:49 am Well, made some better progress on thethis weekend.
I got the power steering cooler installed. It wasn't easy but not as bad as some internet bros made it out to be. Hardest part was removing the hard line of the stock piping that goes into the pump.It was on there tight as hell and pretty hard to access, fortunately once all of the front suspension was off, it was easier.
I have all of the control arms removed to take somewhere to replace the ball joints.
Redid all of the under hood grounds... I chopped off those stupid connector things and just soldered them all into a normal ground eyelet.
Cleaned engine bay, wheel wells, suspension, etc.
I still need to change the oil and trans fluid, put all the suspension back together, rebuild calipers (need to figure out access to an air compressor), replace the OPS again, maybe the wiring there too. Also need to detail the car, get an alignment, then get newand it should be ready to go.
https://www.harborfreight.com/air-tools ... 61454.html
If I had gotten the garage, sure... but

All things considered I like the carport and actually enjoy being outside for wrenching as I'm cooped up most of the time.
- ChrisoftheNorth
- Moderator
- Posts: 47343
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: X5, Bison
Yep...storage is always the PITA. Without a garage, it would be super tough.D Griff wrote: ↑Mon Mar 23, 2020 9:38 amI've thought about it... don't mind the cost but it's more the storage. We have an 1100 square foot house, a shed, and a storage room on the back of the house. I have an extra set of wheels, tools, floor jacks, stands, detailing supplies, two bicycles, kayaks, camping shit, lawn shit... Both storage areas are pretty full of stuff already after living here for two months, and it is like 30% mutual stuff, like lawn things, 60% my stuff, 10% her stuff, so I don't want to add to that something I don't need and would have to wheel out from a shed every time.Detroit wrote: ↑Mon Mar 23, 2020 8:56 am
An air compressor is a pretty handy thing to have around. I bought this one from Harbor Freight 6 years ago and it's been flawless. Had enough balls to rebuild all my C5 calipers without even needing to run. It's also powerful enough to run an air ratchet or impact, which can come in handy more than you'd expect. I also use it for house projects where I need air nailers or the like. Super handy.
https://www.harborfreight.com/air-tools ... 61454.html
If I had gotten the garage, sure... but
All things considered I like the carport and actually enjoy being outside for wrenching as I'm cooped up most of the time.
- ChrisoftheNorth
- Moderator
- Posts: 47343
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: X5, Bison

I resurrected a garbage snowblower and lawnmower just like this. The lawnmower went years ZFG, but the damned snowblower needed something every season. Got sick of it and went electric on all the yard tools.

You'll get good life out of the lawnmower, and it's amazing the mechanical knowledge you can gain by keeping a simple lawnmower running well.
Yeah it's kind of fun because unlike the car project, you can go from total shit storm to a running machine in like an hour with basically old trash that can be found around the house or worse case scenario some cheap parts from the Depot.Detroit wrote: ↑Mon Mar 23, 2020 9:48 am
I resurrected a garbage snowblower and lawnmower just like this. The lawnmower went years ZFG, but the damned snowblower needed something every season. Got sick of it and went electric on all the yard tools.but WAY easier.
You'll get good life out of the lawnmower, and it's amazing the mechanical knowledge you can gain by keeping a simple lawnmower running well.