DFD

fledonfoot wrote: ↑Sun Feb 13, 2022 5:18 pm Perrin are only making 3” exhausts for now, which are loud.

I leave for work at 6am daily. I don’t want to wake the neighbors or sit in a drone box, given this thing ticks over at 3500rpm at 80mph on the highway... If this was a weekend car it’d be a different story.

Damn, I’m getting old.

My Mountune exhaust on the FoST was perfect. Deep and punchy but barely louder than stock, and had a great sound on hard accel.

???

https://86speed.com/perrin-resonated-ca ... frs-brz-86

Just noticed it says it's no longer available.

I know it's technically for the first generation, but it appears to fit well. This video is of the 3" version, but it still doesn't sound too loud IMO.

If you look closely, the left tip sits about an inch or so lower than the right tip, you can see it in the thumbnail for the video.

GR Heavyweight shift knob arrived Saturday.
JDM clear side markers arrive today.
Counterspace Garage Touring86 catback arrives Friday.
JDM GR short shifter assembly on order but has a May/June ETA

You putting a hitch on it?

Johnny_P wrote: ↑Tue Feb 15, 2022 10:31 am You putting a hitch on it?

http://www.slambertperformance.com/shop/twin-hitch

IF I need one, i'll get this. Most likely will just end up in the Jeep for ride days.

fledonfoot wrote: ↑Tue Feb 15, 2022 8:52 am GR Heavyweight shift knob arrived Saturday.
JDM clear side markers arrive today.
Counterspace Garage Touring86 catback arrives Friday.
JDM GR short shifter assembly on order but has a May/June ETA

I really like the look of that cat-back. in4reviews

Exhaust out for delivery... to work

fledonfoot wrote: ↑Sun Feb 13, 2022 8:08 pm If you look closely, the left tip sits about an inch or so lower than the right tip, you can see it in the thumbnail for the video.

Clicked video expecting a C5, leaving disappointed.

CaleDeRoo wrote: ↑Fri Feb 18, 2022 11:36 am

fledonfoot wrote: ↑Sun Feb 13, 2022 8:08 pm If you look closely, the left tip sits about an inch or so lower than the right tip, you can see it in the thumbnail for the video.

Clicked video expecting a C5, leaving disappointed.

that's exactly what I thought of. I can't tell you how many times I tried to get my Brolas just right and level on the C5 before realizing it was just an impossibility.

Exhaust installed.

Deep, mellow and a little punch. Zero cabin drone and looks great. Just what I was looking for.

I’ll grab a couple videos as it breaks in.

Looking forward to hearing that exhaust on the FA24.

Nothing like 25 degree weather to get behind fender liners to swap out side markers.

JDM Subaru LED side markers. Massive difference.

I just wish they had done something with the calipers.

fledonfoot wrote: ↑Sun Feb 20, 2022 12:30 pm




Nothing like 25 degree weather to get behind fender liners to swap out side markers.

JDM Subaru LED side markers. Massive difference.

I just wish they had done something with the calipers.

There's a few reasons these things are so fairly priced. I'm sure there will be plethora of BBKs available soon.

Desertbreh wrote: ↑Sun Feb 20, 2022 1:10 pm

fledonfoot wrote: ↑Sun Feb 20, 2022 12:30 pm




Nothing like 25 degree weather to get behind fender liners to swap out side markers.

JDM Subaru LED side markers. Massive difference.

I just wish they had done something with the calipers.

There's a few reasons these things are so fairly priced. I'm sure there will be plethora of BBKs available soon.

On the 86, just about everything brake, exhaust and suspension is a carry over into this car. There’s plenty of options already.

Love Neptune blue in sunlight.

coogles wrote: ↑Sun Feb 20, 2022 2:53 pm Love Neptune blue in sunlight.

You’re going to love this thing.

fledonfoot wrote: ↑Sun Feb 20, 2022 9:32 pm

coogles wrote: ↑Sun Feb 20, 2022 2:53 pm Love Neptune blue in sunlight.

You’re going to love this thing.

I have no doubt. Can't wait! Except...I have to. It's gonna be a minute.

coogles wrote: ↑Tue Feb 22, 2022 10:52 am

coogles wrote: ↑Tue Feb 22, 2022 10:52 am

Yea blower and everything but why the dry sump? Overheating? no reason to need a dry sump on a street car.

Big Brain Bradley wrote: ↑Thu Feb 24, 2022 7:40 am Yea blower and everything but why the dry sump? Overheating? no reason to need a dry sump on a street car.

That's not a street car, doe. The kit for the first gen BRZ and 86 wasn't bundled with a dry sump setup.

https://www.counterspacegarage.com/harr ... m-tune-kit

coogles wrote: ↑Thu Feb 24, 2022 9:57 am

Big Brain Bradley wrote: ↑Thu Feb 24, 2022 7:40 am Yea blower and everything but why the dry sump? Overheating? no reason to need a dry sump on a street car.

That's not a street car, doe. The kit for the first gen BRZ and 86 wasn't bundled with a dry sump setup.

https://www.counterspacegarage.com/harr ... m-tune-kit

Looks to be some kind of track build, dry sump would be welcome.

coogles wrote: ↑Thu Feb 24, 2022 9:57 am

Big Brain Bradley wrote: ↑Thu Feb 24, 2022 7:40 am Yea blower and everything but why the dry sump? Overheating? no reason to need a dry sump on a street car.

That's not a street car, doe. The kit for the first gen BRZ and 86 wasn't bundled with a dry sump setup.

https://www.counterspacegarage.com/harr ... m-tune-kit

Got it, didn't realize that screen cap was from a racecar build.

February allocation came and went and my order went unfilled. Now we wait until March. Unsurprising, but .

coogles wrote: ↑Thu Feb 24, 2022 1:45 pm February allocation came and went and my order went unfilled. Now we wait until March. Unsurprising, but .

Subaru shut down production in Gunma twice so far in February so you’re probably not going to see anything until the 2nd March allocation cycle at best (Toyota does 2 allocations a month, typically). Production is still biased towards AT models and Premium MTs remain slim pickings.

Interesting note is the two other 86s that my selling dealer got have been held at port for “Quality Action” for 21 days. My car was pushed through despite arriving 10 days after their first allocation arriving at the port. The other 6MT Premium arriving next week is also listed as a port hold with no info as to why.