Dem bicicletas, doe
- 3rdgenfan
- Meat Patty 2nd Class
- Posts: 267
- Joined: Sat Oct 13, 2018 9:41 pm
- Drives: Frontier, Rabbit TDI, G8 GXP
- Location: The First State
This ride tested me, did a 19mile ride the day before and was asked to come out with a friend to do our normal look (the northern section of the image) and then go into downtown Wilmington and return up some steep, steady hills. I managed it, but I was pretty spent after the hills. Seems like I may have upset my wrists and did a little googling and shows handlebar palsy is a thing? Ordered some gloves to see if that helps on the longer rides.
I also slid into [user not found]'s DMs after he informed me I should remove the reflectors from the wheels and here is a picture of the bike. It now has 170 or so miles on it, which is more than I've put on the Rabbit in the past couple months and while it's had some issues I'm not upset about the purchase yet.
- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 40516
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Blue short bus
- Location: Philly
NICE. Love that bike dude. Also followed on Strava. Didn't know you lived so close. Do you have a MTB as well?3rdgenfan wrote: ↑Fri May 29, 2020 10:54 am
This ride tested me, did a 19mile ride the day before and was asked to come out with a friend to do our normal look (the northern section of the image) and then go into downtown Wilmington and return up some steep, steady hills. I managed it, but I was pretty spent after the hills. Seems like I may have upset my wrists and did a little googling and shows handlebar palsy is a thing? Ordered some gloves to see if that helps on the longer rides.
I also slid into [user not found]'s DMs after he informed me I should remove the reflectors from the wheels and here is a picture of the bike. It now has 170 or so miles on it, which is more than I've put on the Rabbit in the past couple months and while it's had some issues I'm not upset about the purchase yet.
I get the hand numbness too. You can do a few things.
1) Lower tire pressures. Not sure what you weigh, or what size tires you run, but there are online resources to help you figure out tire pressure. Post up weight and tire size here and we can help with recommended pressures.
2) Raise the handlebars. You can do this with a stem that sits at a higher angle.
3) Gel pad inserts underneath your handlebar tape.
4) Core exercises, hold yourself up with your core when possible, you should feel light on your hands. Hold the bars loose, avoid death grip. That way you can let the bike bounce and vibrate and transfer far less of those vibrations into your body via your hands.
5) Sometimes gloves help, sometimes they make it worse, depends on how your body works with the specific gloves.
Lastly, just a suggestion, I'd avoid "cross chaining" if possible. That's going into big-big gear or small-small. It puts the chain at a more extreme angle which can wear it and the sprockets out faster.
- 3rdgenfan
- Meat Patty 2nd Class
- Posts: 267
- Joined: Sat Oct 13, 2018 9:41 pm
- Drives: Frontier, Rabbit TDI, G8 GXP
- Location: The First State
Thanks! I just caught the notification, I do have a MTB but it's a dusty old Raleigh that needs to be sent out to pasture since its a medium frame but may get the job done for quick jaunts down at Brandywine Creek SP or White Clay Creek SP.Johnny_P wrote: ↑Fri May 29, 2020 11:07 amNICE. Love that bike dude. Also followed on Strava. Didn't know you lived so close. Do you have a MTB as well?3rdgenfan wrote: ↑Fri May 29, 2020 10:54 am
This ride tested me, did a 19mile ride the day before and was asked to come out with a friend to do our normal look (the northern section of the image) and then go into downtown Wilmington and return up some steep, steady hills. I managed it, but I was pretty spent after the hills. Seems like I may have upset my wrists and did a little googling and shows handlebar palsy is a thing? Ordered some gloves to see if that helps on the longer rides.
I also slid into [user not found]'s DMs after he informed me I should remove the reflectors from the wheels and here is a picture of the bike. It now has 170 or so miles on it, which is more than I've put on the Rabbit in the past couple months and while it's had some issues I'm not upset about the purchase yet.
I get the hand numbness too. You can do a few things.
1) Lower tire pressures. Not sure what you weigh, or what size tires you run, but there are online resources to help you figure out tire pressure. Post up weight and tire size here and we can help with recommended pressures.
2) Raise the handlebars. You can do this with a stem that sits at a higher angle.
3) Gel pad inserts underneath your handlebar tape.
4) Core exercises, hold yourself up with your core when possible, you should feel light on your hands. Hold the bars loose, avoid death grip. That way you can let the bike bounce and vibrate and transfer far less of those vibrations into your body via your hands.
5) Sometimes gloves help, sometimes they make it worse, depends on how your body works with the specific gloves.
Lastly, just a suggestion, I'd avoid "cross chaining" if possible. That's going into big-big gear or small-small. It puts the chain at a more extreme angle which can wear it and the sprockets out faster.
As for the things listed, here are the answers good sir.
1)I am 250lbs, tires are 700x25c (Front is Bontrager R1, rear is Bontrager R2) when I first purchased it they inflated the wheels to 90psi but haven't checked since they swapped the rear tire and tube out.
2)That was also something a friend brought up, I'm not too far hunched over but I can see how that'd assist quite a bit.
3)Currently have the original tape the bike came with (which already shows signs of being fucky) so that is also a solid idea. Is the type of tape a brand preference at all or does it just come down to color/material.
4)I definitely try not to have a death grip unless I'm over some sketchy sections of road and just rest my hands in a semi natural angle on top of the bars but that may be hurting rather than helping
5)Gloves were really just a "why not" thing, I only used them on the MTB rides because the rubber grips were deteriorating rapidly.
- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 40516
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Blue short bus
- Location: Philly
Alright so I wouldn't necessarily go any lower on tire pressure.3rdgenfan wrote: ↑Fri May 29, 2020 11:46 amThanks! I just caught the notification, I do have a MTB but it's a dusty old Raleigh that needs to be sent out to pasture since its a medium frame but may get the job done for quick jaunts down at Brandywine Creek SP or White Clay Creek SP.Johnny_P wrote: ↑Fri May 29, 2020 11:07 am
NICE. Love that bike dude. Also followed on Strava. Didn't know you lived so close. Do you have a MTB as well?
I get the hand numbness too. You can do a few things.
1) Lower tire pressures. Not sure what you weigh, or what size tires you run, but there are online resources to help you figure out tire pressure. Post up weight and tire size here and we can help with recommended pressures.
2) Raise the handlebars. You can do this with a stem that sits at a higher angle.
3) Gel pad inserts underneath your handlebar tape.
4) Core exercises, hold yourself up with your core when possible, you should feel light on your hands. Hold the bars loose, avoid death grip. That way you can let the bike bounce and vibrate and transfer far less of those vibrations into your body via your hands.
5) Sometimes gloves help, sometimes they make it worse, depends on how your body works with the specific gloves.
Lastly, just a suggestion, I'd avoid "cross chaining" if possible. That's going into big-big gear or small-small. It puts the chain at a more extreme angle which can wear it and the sprockets out faster.
As for the things listed, here are the answers good sir.
1)I am 250lbs, tires are 700x25c (Front is Bontrager R1, rear is Bontrager R2) when I first purchased it they inflated the wheels to 90psi but haven't checked since they swapped the rear tire and tube out.
2)That was also something a friend brought up, I'm not too far hunched over but I can see how that'd assist quite a bit.
3)Currently have the original tape the bike came with (which already shows signs of being fucky) so that is also a solid idea. Is the type of tape a brand preference at all or does it just come down to color/material.
4)I definitely try not to have a death grip unless I'm over some sketchy sections of road and just rest my hands in a semi natural angle on top of the bars but that may be hurting rather than helping
5)Gloves were really just a "why not" thing, I only used them on the MTB rides because the rubber grips were deteriorating rapidly.
Bar tape, largely just looks and feel preference. Some is tacky/sticky, others are more like leather, others are just cork. All about the same for vibration reduction, really, in that they aren't fantastic but do help some. Gel pads I was referring to could be something like this (there are various mfrs and such)
https://www.amazon.com/Planet-Bike-Cent ... 703&sr=8-1
And then wrap new tape on top of it. Lots of tutorials online / youtube to show you how. You'll probably mess it up at first. It happens. The pads should help a bit with vibration. Next step from there would be a carbon fiber or vibration reducing handlebar which unfortunately can be a ton of money.
Resting hands is fine. Its death grip that will make it worse. However you're most comfortable. Theoretically you should be able to support your upper body without weight on your hands. Like you would if you were riding with just your fingertips on the bar. That's hard to hold for long time.
in4 glove updates
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
Got the shorts today. Maybe it helped? Ass still hurts after only 20 minutes.
I assume I need to wash these every day. Do you guys just run the washer daily?
I assume I need to wash these every day. Do you guys just run the washer daily?
- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 40516
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Blue short bus
- Location: Philly
I have 4 pair. You might be able to get by with 2 rides before washing. Don’t wear undies underneath them.troyguitar wrote: ↑Fri May 29, 2020 4:14 pm Got the shorts today. Maybe it helped? Ass still hurts after only 20 minutes.
I assume I need to wash these every day. Do you guys just run the washer daily?
- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 40516
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Blue short bus
- Location: Philly
Facebook message from rando dude....
People buying stuff online are freaking strange.
I'm assuming he's talking about my mountain bike, but can't be sure as no item is linked and there's no reference to any post...Did you sell this bike if not id be interested. whats the frame size?
People buying stuff online are freaking strange.
I have my BMW listed on FB marketplace and the messages I get from there are pure trash.Johnny_P wrote: ↑Fri May 29, 2020 11:12 pm Facebook message from rando dude....
I'm assuming he's talking about my mountain bike, but can't be sure as no item is linked and there's no reference to any post...Did you sell this bike if not id be interested. whats the frame size?
People buying stuff online are freaking strange.
I gave you a follow as well3rdgenfan wrote: ↑Fri May 29, 2020 11:46 amThanks! I just caught the notification, I do have a MTB but it's a dusty old Raleigh that needs to be sent out to pasture since its a medium frame but may get the job done for quick jaunts down at Brandywine Creek SP or White Clay Creek SP.Johnny_P wrote: ↑Fri May 29, 2020 11:07 am
NICE. Love that bike dude. Also followed on Strava. Didn't know you lived so close. Do you have a MTB as well?
I get the hand numbness too. You can do a few things.
1) Lower tire pressures. Not sure what you weigh, or what size tires you run, but there are online resources to help you figure out tire pressure. Post up weight and tire size here and we can help with recommended pressures.
2) Raise the handlebars. You can do this with a stem that sits at a higher angle.
3) Gel pad inserts underneath your handlebar tape.
4) Core exercises, hold yourself up with your core when possible, you should feel light on your hands. Hold the bars loose, avoid death grip. That way you can let the bike bounce and vibrate and transfer far less of those vibrations into your body via your hands.
5) Sometimes gloves help, sometimes they make it worse, depends on how your body works with the specific gloves.
Lastly, just a suggestion, I'd avoid "cross chaining" if possible. That's going into big-big gear or small-small. It puts the chain at a more extreme angle which can wear it and the sprockets out faster.
As for the things listed, here are the answers good sir.
1)I am 250lbs, tires are 700x25c (Front is Bontrager R1, rear is Bontrager R2) when I first purchased it they inflated the wheels to 90psi but haven't checked since they swapped the rear tire and tube out.
2)That was also something a friend brought up, I'm not too far hunched over but I can see how that'd assist quite a bit.
3)Currently have the original tape the bike came with (which already shows signs of being fucky) so that is also a solid idea. Is the type of tape a brand preference at all or does it just come down to color/material.
4)I definitely try not to have a death grip unless I'm over some sketchy sections of road and just rest my hands in a semi natural angle on top of the bars but that may be hurting rather than helping
5)Gloves were really just a "why not" thing, I only used them on the MTB rides because the rubber grips were deteriorating rapidly.
I got some SRAM tape as I still had ancient stuff my dad put on my bike probably 20+ years ago. I followed a Park Tool video and took my time and it was pretty easy. I also raised my stem up and am significantly more comfortable. Definitely get the numb hands though, I just love my hands and normally open them up with the bars in the groove between my thumbs and pointer fingers so I can move my fingers around a bit, seems to help
Why are you not sharing these messages?D Griff wrote:I have my BMW listed on FB marketplace and the messages I get from there are pure trash.
Sent from my Pixel 3 XL using Tapatalk
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
Just spent about 50-55 minutes doing a 20 minute ride. Took 30-35 minutes of connecting, disconnecting, opening, closing shit to get the fucking trainer, HR monitor, and Zwift to all talk to each other at the same god damn time.
Ass still hurts doing only 20 minutes. All day every day. Less than it did when doing 60 minutes. How many fucking days does it take to stop hurting?
Ass still hurts doing only 20 minutes. All day every day. Less than it did when doing 60 minutes. How many fucking days does it take to stop hurting?
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
On the plus side, my neck doesn't hurt nearly as much if I just stare at the floor instead of watching the "road" in front of me.
- 3rdgenfan
- Meat Patty 2nd Class
- Posts: 267
- Joined: Sat Oct 13, 2018 9:41 pm
- Drives: Frontier, Rabbit TDI, G8 GXP
- Location: The First State
The ass is gonna hurt regardless but it took about a week or so on the roadbike to grow used to it. Although I used to ride rough ass trails so maybe I'm used to it?
- Desertbreh
- Chief Master Sirloin
- Posts: 16944
- Joined: Thu Nov 03, 2016 11:31 am
- Location: Beyond Thunderdome
- Desertbreh
- Chief Master Sirloin
- Posts: 16944
- Joined: Thu Nov 03, 2016 11:31 am
- Location: Beyond Thunderdome
- Desertbreh
- Chief Master Sirloin
- Posts: 16944
- Joined: Thu Nov 03, 2016 11:31 am
- Location: Beyond Thunderdome
- Desertbreh
- Chief Master Sirloin
- Posts: 16944
- Joined: Thu Nov 03, 2016 11:31 am
- Location: Beyond Thunderdome
- fledonfoot
- First Sirloin
- Posts: 4244
- Joined: Wed Nov 02, 2016 10:33 pm
- Drives: Taco Truk | Power Wheels Heep
Troy: if you want to try an ftp test again, Zwift has a new one starting at 50 watts instead of 100. https://zwiftinsider.com/update-1-0-50775/
In other news, I’m debating an easy lap on the bike tomorrow. I’m stir crazy and need to do something.
2 weeks ago I herniated two discs in my lower back, one of which was pressing on my spinal cord, to the point where I couldn’t walk for two days and lost feeling in my left leg for about a week. A healthy dose of steroids, pain killers and muscle relaxers combined with some stretches has me effectively pain free and feeling...good?
Mercer is flat, smooth and easy. I’ll likely hop on the rebuilt Occam and take an easy spin.
In other news, I’m debating an easy lap on the bike tomorrow. I’m stir crazy and need to do something.
2 weeks ago I herniated two discs in my lower back, one of which was pressing on my spinal cord, to the point where I couldn’t walk for two days and lost feeling in my left leg for about a week. A healthy dose of steroids, pain killers and muscle relaxers combined with some stretches has me effectively pain free and feeling...good?
Mercer is flat, smooth and easy. I’ll likely hop on the rebuilt Occam and take an easy spin.
- Apex
- Chief Master Sirloin of the Wasteful Steak
- Posts: 29815
- Joined: Wed Nov 02, 2016 10:36 pm
- Drives: Abominable
- Location: NJ
Nope, and it’s why I love the state.[user not found] wrote: ↑Sat May 30, 2020 9:59 pm
People don’t picture this stuff when they think NJ.
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
just had first bike ride in the hills of the neighborhood. 2.5 miles. I feel bad. it was redicilous.
brain go brrrrrr
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
Another 20 mins down, much less today since I got the zwift pairing shit done with only a couple of resets instead of 30 minutes of fucking around.
My ass still hurts but the rides seem to be a lot more tolerable now, though I made multiple changes at once so I don't know what each change did:
Reduce duration from 60 minutes to 20
Add Depends
Lean forward a LOT more, like 60/40 hoods/drops instead of 90/10 tops/hoods
Stare at the floor instead of the "road" on the screen
I do know that the last one was a big help despite it meaning that I won't be able to ride outside any time soon. Apparently my neck is the reason I hate the drop bars, not my arms/core strength. It's an old hockey injury that I haven't figured out yet, I was planning to see a PT about it this year right before the apocalypse hit...
Hopefully this is about the right amount of exercise for the pain to go down over time. I'm still kind of shopping saddles. My best guess as to a measurement of my "sit bone width" is 8cm. That's so narrow it's below the bottom of the scale on the Ergon saddle selector. Their "small" sizes are said to fit 9-12cm widths. Maybe there's a kiddie-sized saddle that would work? I'm also thinking about trying something more MTB-touring-oriented so it'll be made to work with a middle-of-the-road upright-ish seating position. Dunno. What I have now is at least bearable for 20 mins with diapers.
My ass still hurts but the rides seem to be a lot more tolerable now, though I made multiple changes at once so I don't know what each change did:
Reduce duration from 60 minutes to 20
Add Depends
Lean forward a LOT more, like 60/40 hoods/drops instead of 90/10 tops/hoods
Stare at the floor instead of the "road" on the screen
I do know that the last one was a big help despite it meaning that I won't be able to ride outside any time soon. Apparently my neck is the reason I hate the drop bars, not my arms/core strength. It's an old hockey injury that I haven't figured out yet, I was planning to see a PT about it this year right before the apocalypse hit...
Hopefully this is about the right amount of exercise for the pain to go down over time. I'm still kind of shopping saddles. My best guess as to a measurement of my "sit bone width" is 8cm. That's so narrow it's below the bottom of the scale on the Ergon saddle selector. Their "small" sizes are said to fit 9-12cm widths. Maybe there's a kiddie-sized saddle that would work? I'm also thinking about trying something more MTB-touring-oriented so it'll be made to work with a middle-of-the-road upright-ish seating position. Dunno. What I have now is at least bearable for 20 mins with diapers.
not quite. My mom actually purchased this bike new as a gift for my dad when they got engaged (83 I think). He got the seat at some point in the 80s. It’s pretty damn comfy honestly, that it isn’t serious cycle bro approved.
The disc I put on in college, I used the bike to ride to school and sometimes wore jeans/pants that would get dirty from the chain. It works
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
looks similar to the seat on the wife's bike which is totes comfortable for my wide aasD Griff wrote: ↑Sun May 31, 2020 12:15 pmnot quite. My mom actually purchased this bike new as a gift for my dad when they got engaged (83 I think). He got the seat at some point in the 80s. It’s pretty damn comfy honestly, that it isn’t serious cycle bro approved.
The disc I put on in college, I used the bike to ride to school and sometimes wore jeans/pants that would get dirty from the chain. It works
brain go brrrrrr