will give you his Benchmade stuff if you prove that you will fucking DIE before supporting any kind of arms restrictions in this country. SHALL NOT BE INFRINGED, motherfuckers.KYGTIGuy wrote:Any reliable secondary markets for knives?
So I bought some useless junk recently...
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
- Apex
- Chief Master Sirloin of the Wasteful Steak
- Posts: 29815
- Joined: Wed Nov 02, 2016 10:36 pm
- Drives: Abominable
- Location: NJ
troyguitar wrote: ↑Fri May 17, 2019 11:25 pmwill give you his Benchmade stuff if you prove that you will fucking DIE before supporting any kind of arms restrictions in this country. SHALL NOT BE INFRINGED, motherfuckers.KYGTIGuy wrote:Any reliable secondary markets for knives?
let me know if you want anything for shipping and I’ll PM you my address.
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
Bought a plug kit for the motorbike, a 13 dollar LED flood light since the ones for my sconces are somewhat special, and a stick on sunshade for the car for the
Also ed on two blipshift tees, a used but good engine guard for the motorbike.
Also ed on two blipshift tees, a used but good engine guard for the motorbike.
brain go brrrrrr
This Benchmade honestly feels kinda sloppy. Ive handled Benchmades for a total of 3 minutes prior to owning this one but I don't know.
I can literally move my hand in a downward motion then jerk it(lol) back up and the blade will fully open. Doesn't seem right.
Spyderco on the other hand seems a little too stiff
The 25 dollar RAT feels just as good honestly. Just not as sharp
I can literally move my hand in a downward motion then jerk it(lol) back up and the blade will fully open. Doesn't seem right.
Spyderco on the other hand seems a little too stiff
The 25 dollar RAT feels just as good honestly. Just not as sharp
- CorvetteWaxer
- Senior Master Sirloin
- Posts: 8381
- Joined: Mon Feb 06, 2017 9:35 pm
- Drives: 1986 Hyundai Excel, 351C swap
- Location: Where it happens every year
Non-Assisted Benchmades should open that way with the axis lock, if you are holding the lock "open". If it is sloppy feeling when it is deployed and locked, that's another issue.KYGTIGuy wrote: ↑Wed May 22, 2019 2:54 pm This Benchmade honestly feels kinda sloppy. Ive handled Benchmades for a total of 3 minutes prior to owning this one but I don't know.
I can literally move my hand in a downward motion then jerk it(lol) back up and the blade will fully open. Doesn't seem right.
Spyderco on the other hand seems a little too stiff
The 25 dollar RAT feels just as good honestly. Just not as sharp
I have 5 of the 940 variants and they are all great, but I bought them before the company decided that their reputation wasn't worth a flying fuck.
It feels tight when deployed and locked, so that's good. I fell in love with the 940 before the hubbub with the guns so I had to buy it. I'm still not opposed to them but I like the Spyderco better I have to say.CorvetteWaxer wrote: ↑Wed May 22, 2019 2:56 pmNon-Assisted Benchmades should open that way with the axis lock, if you are holding the lock "open". If it is sloppy feeling when it is deployed and locked, that's another issue.KYGTIGuy wrote: ↑Wed May 22, 2019 2:54 pm This Benchmade honestly feels kinda sloppy. Ive handled Benchmades for a total of 3 minutes prior to owning this one but I don't know.
I can literally move my hand in a downward motion then jerk it(lol) back up and the blade will fully open. Doesn't seem right.
Spyderco on the other hand seems a little too stiff
The 25 dollar RAT feels just as good honestly. Just not as sharp
I have 5 of the 940 variants and they are all great, but I bought them before the company decided that their reputation wasn't worth a flying fuck.
Where(if anywhere) do you list knives you want to get rid of?
Looking to buy a machinist tool box to store them at the moment. How do you store yours?
- CorvetteWaxer
- Senior Master Sirloin
- Posts: 8381
- Joined: Mon Feb 06, 2017 9:35 pm
- Drives: 1986 Hyundai Excel, 351C swap
- Location: Where it happens every year
I generally never sell too much of anything, unless there is a solid cash return. I just sold my Nikon D850 and 24-70 VR lens, but only because I was able to recover $4,000 for them and I rarely used them anymore since I moved to the Nikon Z7 and got the 24-70 f/2.8 Z lens. Knives don't return much cash so I just hold them. I've sold two guns in my life and regretted one of them. The other was a POS Sig P239 that I shouldn't have bought in the first place.KYGTIGuy wrote: ↑Wed May 22, 2019 3:14 pmIt feels tight when deployed and locked, so that's good. I fell in love with the 940 before the hubbub with the guns so I had to buy it. I'm still not opposed to them but I like the Spyderco better I have to say.CorvetteWaxer wrote: ↑Wed May 22, 2019 2:56 pm
Non-Assisted Benchmades should open that way with the axis lock, if you are holding the lock "open". If it is sloppy feeling when it is deployed and locked, that's another issue.
I have 5 of the 940 variants and they are all great, but I bought them before the company decided that their reputation wasn't worth a flying fuck.
Where(if anywhere) do you list knives you want to get rid of?
Looking to buy a machinist tool box to store them at the moment. How do you store yours?
I have given away a couple knives but haven't bothered to sell any (yet).
If you know, Where is a good secondary market for knives? Preferably excluding eBayCorvetteWaxer wrote: ↑Wed May 22, 2019 3:39 pmI generally never sell too much of anything, unless there is a solid cash return. I just sold my Nikon D850 and 24-70 VR lens, but only because I was able to recover $4,000 for them and I rarely used them anymore since I moved to the Nikon Z7 and got the 24-70 f/2.8 Z lens. Knives don't return much cash so I just hold them. I've sold two guns in my life and regretted one of them. The other was a POS Sig P239 that I shouldn't have bought in the first place.KYGTIGuy wrote: ↑Wed May 22, 2019 3:14 pm
It feels tight when deployed and locked, so that's good. I fell in love with the 940 before the hubbub with the guns so I had to buy it. I'm still not opposed to them but I like the Spyderco better I have to say.
Where(if anywhere) do you list knives you want to get rid of?
Looking to buy a machinist tool box to store them at the moment. How do you store yours?
I have given away a couple knives but haven't bothered to sell any (yet).
- CorvetteWaxer
- Senior Master Sirloin
- Posts: 8381
- Joined: Mon Feb 06, 2017 9:35 pm
- Drives: 1986 Hyundai Excel, 351C swap
- Location: Where it happens every year
There used to be some good activity on https://www.bladeforums.com/ but I haven't really been over there in a few (8?) years.KYGTIGuy wrote: ↑Wed May 22, 2019 4:08 pmIf you know, Where is a good secondary market for knives? Preferably excluding eBayCorvetteWaxer wrote: ↑Wed May 22, 2019 3:39 pm
I generally never sell too much of anything, unless there is a solid cash return. I just sold my Nikon D850 and 24-70 VR lens, but only because I was able to recover $4,000 for them and I rarely used them anymore since I moved to the Nikon Z7 and got the 24-70 f/2.8 Z lens. Knives don't return much cash so I just hold them. I've sold two guns in my life and regretted one of them. The other was a POS Sig P239 that I shouldn't have bought in the first place.
I have given away a couple knives but haven't bothered to sell any (yet).
- Apex
- Chief Master Sirloin of the Wasteful Steak
- Posts: 29815
- Joined: Wed Nov 02, 2016 10:36 pm
- Drives: Abominable
- Location: NJ
DFD probably won’t be a bad secondary knife market...KYGTIGuy wrote: ↑Wed May 22, 2019 4:08 pmIf you know, Where is a good secondary market for knives? Preferably excluding eBayCorvetteWaxer wrote: ↑Wed May 22, 2019 3:39 pm
I generally never sell too much of anything, unless there is a solid cash return. I just sold my Nikon D850 and 24-70 VR lens, but only because I was able to recover $4,000 for them and I rarely used them anymore since I moved to the Nikon Z7 and got the 24-70 f/2.8 Z lens. Knives don't return much cash so I just hold them. I've sold two guns in my life and regretted one of them. The other was a POS Sig P239 that I shouldn't have bought in the first place.
I have given away a couple knives but haven't bothered to sell any (yet).
- goIftdibrad
- Chief Master Soft Brain
- Posts: 16746
- Joined: Thu Nov 03, 2016 9:01 am
- Drives: straight past the apex
- SAWCE
- Command Chief Master Sirloin
- Posts: 21885
- Joined: Wed Nov 02, 2016 11:26 pm
- Drives: Ebombtra
- Location: The mountains
Bought a boar hair brush for my beard. Barber that trimmed it up for me last time was using one on it while I was in there, and I really liked how it straightened it out a bit, so hopefully I’ll look a little more well kept. Will post pics of how it does once I get it tomorrow.
What's boar hair do that a normal brush doesn't? Sounds cool.SAWCE wrote: ↑Thu May 30, 2019 3:52 pm Bought a boar hair brush for my beard. Barber that trimmed it up for me last time was using one on it while I was in there, and I really liked how it straightened it out a bit, so hopefully I’ll look a little more well kept. Will post pics of how it does once I get it tomorrow.