Dat detailing thread, doe.
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
I use that "Cockpit Premium" stuff on the entire interior except for glass/carpet. Seems fine.
- ChrisoftheNorth
- Moderator
- Posts: 47112
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: 4R
https://www.amazon.com/nextzett-9247051 ... B0002Z2MZ4troyguitar wrote: ↑Wed Jul 01, 2020 11:37 am I use that "Cockpit Premium" stuff on the entire interior except for glass/carpet. Seems fine.
?
Looks like good stuff.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
- ChrisoftheNorth
- Moderator
- Posts: 47112
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: 4R
My biggest thing is some sort of conditioner/protectant for the interior plastics in the s because they see a lot more sun and dust/dirt than my past vehicles.D Griff wrote: ↑Wed Jul 01, 2020 11:33 amI usually just use water with a little bit of rinseless wash to clean all the plastics. I use Griots interior cleaner and leather cleaner/conditioner which has worked well.Detroit wrote: ↑Wed Jul 01, 2020 9:59 am What's the hotness for interior panel cleaning/treatment these days? The bottle of Vinylex that I've had forever is just about gone, and I was going to buy another one until I saw the photos on amazon promoting use on a C5 door panel taken in the late 90's. I've always liked the way the stuff cleans and treats interior panels, but wondering if there's anything better these days since I'm buying something anyway.
I think this cockpit premium stuff might do it for me.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
Yep that one, been using it on all interior plastic/vinyl stuff for years since IIRC [user not found] mentioned it on golfmk6. Most "leather" is also basically plastic too.Detroit wrote: ↑Wed Jul 01, 2020 12:16 pmhttps://www.amazon.com/nextzett-9247051 ... B0002Z2MZ4troyguitar wrote: ↑Wed Jul 01, 2020 11:37 am I use that "Cockpit Premium" stuff on the entire interior except for glass/carpet. Seems fine.
?
Looks like good stuff.
- ChrisoftheNorth
- Moderator
- Posts: 47112
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: 4R
Yea, there's very little leather in cars anymore.troyguitar wrote: ↑Wed Jul 01, 2020 12:24 pmYep that one, been using it on all interior plastic/vinyl stuff for years since IIRC [user not found] mentioned it on golfmk6. Most "leather" is also basically plastic too.Detroit wrote: ↑Wed Jul 01, 2020 12:16 pm
https://www.amazon.com/nextzett-9247051 ... B0002Z2MZ4
?
Looks like good stuff.
What's amazing is how good vinyl/plastic material is these days. Last fall, I had a material engineer give me two material samples, one a fancy vinyl and one a fancy leather. He asked me to identify the real leather and I got it wrong. I was :minblown:
Vinyl is better for the environment and can wear better than leather too.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
The Sensatec in my 328i was fantastic. Would take over leather any day.Detroit wrote: ↑Wed Jul 01, 2020 12:27 pmYea, there's very little leather in cars anymore.troyguitar wrote: ↑Wed Jul 01, 2020 12:24 pm
Yep that one, been using it on all interior plastic/vinyl stuff for years since IIRC [user not found] mentioned it on golfmk6. Most "leather" is also basically plastic too.
What's amazing is how good vinyl/plastic material is these days. Last fall, I had a material engineer give me two material samples, one a fancy vinyl and one a fancy leather. He asked me to identify the real leather and I got it wrong. I was :minblown:
Vinyl is better for the environment and can wear better than leather too.
- troyguitar
- Command Chief Master Sirloin
- Posts: 20088
- Joined: Wed Nov 02, 2016 11:15 pm
- Drives: Trek Domane
- Location: Swamp
What the plastic doesn't do is breathe well, but most leather now is coated in so much plastic that it doesn't breathe well either so it is all the same.
- ChrisoftheNorth
- Moderator
- Posts: 47112
- Joined: Thu Nov 03, 2016 6:10 am
- Drives: 4R
It's why I really don't like "leather" seats and go for cloth whenever possible.troyguitar wrote: ↑Wed Jul 01, 2020 1:12 pm What the plastic doesn't do is breathe well, but most leather now is coated in so much plastic that it doesn't breathe well either so it is all the same.
Desertbreh wrote: ↑Tue Oct 10, 2017 6:40 pm My guess would be that Chris took some time off because he has read the dialogue on this page 1,345 times and decided to spend some of his free time doing something besides beating a horse to death.
- wap
- Chief Master Sirloin of the Wasteful Steak
- Posts: 45159
- Joined: Wed Nov 02, 2016 11:52 pm
- Drives: Blue Meanie
- Location: Pepperland
I like that stuff, too. Leaves a nice matt finish, no shine.Detroit wrote: ↑Wed Jul 01, 2020 12:16 pmhttps://www.amazon.com/nextzett-9247051 ... B0002Z2MZ4troyguitar wrote: ↑Wed Jul 01, 2020 11:37 am I use that "Cockpit Premium" stuff on the entire interior except for glass/carpet. Seems fine.
?
Looks like good stuff.
- wap
- Chief Master Sirloin of the Wasteful Steak
- Posts: 45159
- Joined: Wed Nov 02, 2016 11:52 pm
- Drives: Blue Meanie
- Location: Pepperland
I think that's when I first bought it, too.troyguitar wrote: ↑Wed Jul 01, 2020 12:24 pmYep that one, been using it on all interior plastic/vinyl stuff for years since IIRC [user not found] mentioned it on golfmk6. Most "leather" is also basically plastic too.Detroit wrote: ↑Wed Jul 01, 2020 12:16 pm
https://www.amazon.com/nextzett-9247051 ... B0002Z2MZ4
?
Looks like good stuff.
- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 40487
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Blue short bus
- Location: Philly
Microfiber towel. Water with a couple drops of mild dish soap. That's it.Detroit wrote: ↑Wed Jul 01, 2020 9:59 am What's the hotness for interior panel cleaning/treatment these days? The bottle of Vinylex that I've had forever is just about gone, and I was going to buy another one until I saw the photos on amazon promoting use on a C5 door panel taken in the late 90's. I've always liked the way the stuff cleans and treats interior panels, but wondering if there's anything better these days since I'm buying something anyway.
- Johnny_P
- Chief Master Sirloin of the Wasteful Steak
- Posts: 40487
- Joined: Thu Nov 03, 2016 9:52 am
- Drives: Blue short bus
- Location: Philly
Interesting. Never noticed a problem. But will keep in mind.[user not found] wrote: ↑Sat Jul 04, 2020 8:43 amDish soap strips the oils off of the plastic, would not advise. Straight water would be better.
- RLWake
- Meat Patty 2nd Class
- Posts: 453
- Joined: Fri Feb 07, 2020 7:41 pm
- Drives: CHEESE
- Location: Orlando, FL
This whole detailing business thing has been pretty damn nice lately. $600 for about 10-12hrs of work aint bad.
Satisfying as fuck too. I’ll post whole car pics tomorrow morning when the sun comes up.
Satisfying as fuck too. I’ll post whole car pics tomorrow morning when the sun comes up.
2010 Audi TT APR Stg1 (sold) >> 2012 BMW 335i FBO (sold) >> 2009 Miata zoom-zoom spec "Cheese" (sold) >> 2022 Hyundai Elantra N + 1999 Miata Maacover Project
- RLWake
- Meat Patty 2nd Class
- Posts: 453
- Joined: Fri Feb 07, 2020 7:41 pm
- Drives: CHEESE
- Location: Orlando, FL
I do but I’m going to the fuck outta that until it’s somewhat done. I only moved into my new place a little less than a month ago. The detailing biz is financing the garage and everything in it!
2010 Audi TT APR Stg1 (sold) >> 2012 BMW 335i FBO (sold) >> 2009 Miata zoom-zoom spec "Cheese" (sold) >> 2022 Hyundai Elantra N + 1999 Miata Maacover Project
Took the through a touchless wash today and woof, I really need a correction.
IIRC, I used Griots pads with meguiars ultimate polish on the last R a while ago but wasn't really impressed with the results. It barely removed any swirls although I don't know if that was due to the pad, the product, or me.
I see there are specific "swirl remover" products but are any different from regular polish?
Once the weather warms up I really want to fix up the alpo with new pads so I'm thinking to clay > polish > sealant instead of wax?
IIRC, I used Griots pads with meguiars ultimate polish on the last R a while ago but wasn't really impressed with the results. It barely removed any swirls although I don't know if that was due to the pad, the product, or me.
I see there are specific "swirl remover" products but are any different from regular polish?
Once the weather warms up I really want to fix up the alpo with new pads so I'm thinking to clay > polish > sealant instead of wax?
- Tar
- Chief Master Sirloin
- Posts: 14126
- Joined: Fri Nov 04, 2016 6:06 pm
- Drives: Beige Family Sedan sans Dent
- Location: Canuckistan
I should do a midlife paint correction and sealant of some sort. I'm kind of thinking about ceramic coating, but I've only been impressed with the professional application on my MK6. The retail CKquartz stuff lasted a few months without any reload applications.
The local place near me charges ~$700 for a correction and cquartz application.Tarspin wrote: ↑Mon Mar 08, 2021 7:12 am
I should do a midlife paint correction and sealant of some sort. I'm kind of thinking about ceramic coating, but I've only been impressed with the professional application on my MK6. The retail CKquartz stuff lasted a few months without any reload applications.
I also see adams has a new graphene ceramic that's supposed to last longer? The ceramics always scared me because I don't want to seal in imperfections.
Do you still use the lake country pads? Does the orange cut well enough for swirls? And what about microfiber pads?[user not found] wrote: ↑Mon Mar 08, 2021 9:09 amI'm very happy with the Gtechniq Wheel Armour I put on the wheels of the wife's MINI - been nearly a year, 12k miles of abuse, and it's working wonderfully.Tarspin wrote: ↑Mon Mar 08, 2021 7:12 am
I should do a midlife paint correction and sealant of some sort. I'm kind of thinking about ceramic coating, but I've only been impressed with the professional application on my MK6. The retail CKquartz stuff lasted a few months without any reload applications.
That MINI brake dust is a bitch, normally. Not with this stuff on the finish.
https://smile.amazon.com/Lake-Country-M ... 174&sr=8-3
- RLWake
- Meat Patty 2nd Class
- Posts: 453
- Joined: Fri Feb 07, 2020 7:41 pm
- Drives: CHEESE
- Location: Orlando, FL
CQuartz should be lasting you at least 2 years if you're doing it right.Tarspin wrote: ↑Mon Mar 08, 2021 7:12 am
I should do a midlife paint correction and sealant of some sort. I'm kind of thinking about ceramic coating, but I've only been impressed with the professional application on my MK6. The retail CKquartz stuff lasted a few months without any reload applications.
I use Gtechniq coatings myself. Never had a problem with the longevity of those.
2010 Audi TT APR Stg1 (sold) >> 2012 BMW 335i FBO (sold) >> 2009 Miata zoom-zoom spec "Cheese" (sold) >> 2022 Hyundai Elantra N + 1999 Miata Maacover Project
- RLWake
- Meat Patty 2nd Class
- Posts: 453
- Joined: Fri Feb 07, 2020 7:41 pm
- Drives: CHEESE
- Location: Orlando, FL
I'm a huge believer in the RUPES system. DA Coarse and a Blue Foam or Blue Wool pad for cutting. Wool will hit swirls like a freight train, while the foam will still work great but only hit like a bus rather than a train. After that, follow up with DA Fine and a Yellow Foam pad. Works like a charm.Gberg2119 wrote: ↑Mon Mar 08, 2021 11:15 amDo you still use the lake country pads? Does the orange cut well enough for swirls? And what about microfiber pads?[user not found] wrote: ↑Mon Mar 08, 2021 9:09 am
I'm very happy with the Gtechniq Wheel Armour I put on the wheels of the wife's MINI - been nearly a year, 12k miles of abuse, and it's working wonderfully.
That MINI brake dust is a bitch, normally. Not with this stuff on the finish.
https://smile.amazon.com/Lake-Country-M ... 174&sr=8-3
2010 Audi TT APR Stg1 (sold) >> 2012 BMW 335i FBO (sold) >> 2009 Miata zoom-zoom spec "Cheese" (sold) >> 2022 Hyundai Elantra N + 1999 Miata Maacover Project
- RLWake
- Meat Patty 2nd Class
- Posts: 453
- Joined: Fri Feb 07, 2020 7:41 pm
- Drives: CHEESE
- Location: Orlando, FL
As a guy who has done a massive amount of research into coatings... I call massive on the Adam's Graphene. It's a good coating, sure, but the graphene oxides in them are a marketing buzz thing and really don't actually add much.Gberg2119 wrote: ↑Mon Mar 08, 2021 11:13 amThe local place near me charges ~$700 for a correction and cquartz application.Tarspin wrote: ↑Mon Mar 08, 2021 7:12 am
I should do a midlife paint correction and sealant of some sort. I'm kind of thinking about ceramic coating, but I've only been impressed with the professional application on my MK6. The retail CKquartz stuff lasted a few months without any reload applications.
I also see adams has a new graphene ceramic that's supposed to last longer? The ceramics always scared me because I don't want to seal in imperfections.
If you want a long lasting coating, go with Gtechniq Crystal Serum Light. Top it with EXOv4.
Just make sure that you correct the paint to your satisfaction before putting it on. You also MUST use Gtechniq Panel Wipe before applying the coating. It removes any excess residues, etc that might prevent the coating from bonding correctly. It will also show you the REAL finish of the surface... the pros tend to call Panel Wipe "truth serum" because it wipes away all fillers.
If you do it by the book, paint correction and coating DIY is nothing to be afraid of. I can offer you plenty of advice on how to do it correctly. Feel free to send me a message at any time or post here and we'll talk.
2010 Audi TT APR Stg1 (sold) >> 2012 BMW 335i FBO (sold) >> 2009 Miata zoom-zoom spec "Cheese" (sold) >> 2022 Hyundai Elantra N + 1999 Miata Maacover Project
- RLWake
- Meat Patty 2nd Class
- Posts: 453
- Joined: Fri Feb 07, 2020 7:41 pm
- Drives: CHEESE
- Location: Orlando, FL
Gtechniq C5 Wheel Armor is a great product. You can use CSL on the wheels too, but C5 is just plain easy.[user not found] wrote: ↑Mon Mar 08, 2021 9:09 amI'm very happy with the Gtechniq Wheel Armour I put on the wheels of the wife's MINI - been nearly a year, 12k miles of abuse, and it's working wonderfully.Tarspin wrote: ↑Mon Mar 08, 2021 7:12 am
I should do a midlife paint correction and sealant of some sort. I'm kind of thinking about ceramic coating, but I've only been impressed with the professional application on my MK6. The retail CKquartz stuff lasted a few months without any reload applications.
That MINI brake dust is a bitch, normally. Not with this stuff on the finish.
Also it's all fun and games until a customer wants you to coat a set of his Rotiform LASR's... god that took forever. So many spokes, nooks, and crannies
2010 Audi TT APR Stg1 (sold) >> 2012 BMW 335i FBO (sold) >> 2009 Miata zoom-zoom spec "Cheese" (sold) >> 2022 Hyundai Elantra N + 1999 Miata Maacover Project
What's your sealant of choice nowadays?[user not found] wrote: ↑Mon Mar 08, 2021 11:22 amI switched to the Lake Country SDO pads: https://www.autogeek.net/lake-country-s ... h-pds.htmlGberg2119 wrote: ↑Mon Mar 08, 2021 11:15 am
Do you still use the lake country pads? Does the orange cut well enough for swirls? And what about microfiber pads?
https://smile.amazon.com/Lake-Country-M ... 174&sr=8-3
Blue pad with Megs 105, Orange pad with Megs 205. Black pad for wax/sealant. Done.