Pasta to Brats - BendeRs R
Posted: Sat Jul 13, 2019 11:05 pm
I hereby christen this v dub as the buttplug. It is certainly shaped like one. Nice sex toy Paul..wap wrote: ↑Sat Jul 13, 2019 10:40 pmDesertbreh wrote: ↑Sat Jul 13, 2019 6:49 pm
Fucking Ron. Every drive would be an adventure with that one.
Pretty much par for the course with car ownershit, this is the entire reason was invented.
he doesn’t have money after all the[user not found] wrote: ↑Sun Jul 14, 2019 8:33 amR or GTI?MexicanYarisTK wrote: ↑Sun Jul 14, 2019 8:23 am
You mean his current white mk7.5? Its stage 1 last i checked
Gti[user not found] wrote: ↑Sun Jul 14, 2019 8:33 amR or GTI?MexicanYarisTK wrote: ↑Sun Jul 14, 2019 8:23 am
You mean his current white mk7.5? Its stage 1 last i checked
MexicanYarisTK wrote: ↑Mon Jul 15, 2019 6:05 amPlac profit
Saving money to go to a cheaper car, spends money on mods
As in you don’t want to yet?
You'll appreciate the tuna more after driving without it for a bit.[user not found] wrote: ↑Mon Jul 15, 2019 6:57 pmLiterally must be updated since Thursday when I last looked. The security gateways on the 19s are different so some folks are having to do some additional work.fledonfoot wrote: ↑Mon Jul 15, 2019 6:49 pm
As in you don’t want to yet?
https://www.cobbtuning.com/products/sta ... mk7-golf-r Shows for 2019 models in my catalog.
I'll let you know when. Probably not immediately.
I think my cost on that is in the 850 range plus shipping.[user not found] wrote: ↑Mon Jul 15, 2019 6:57 pmLiterally must be updated since Thursday when I last looked. The security gateways on the 19s are different so some folks are having to do some additional work.fledonfoot wrote: ↑Mon Jul 15, 2019 6:49 pm
As in you don’t want to yet?
https://www.cobbtuning.com/products/sta ... mk7-golf-r Shows for 2019 models in my catalog.
I'll let you know when. Probably not immediately.
[user not found] wrote: ↑Sat Jul 13, 2019 10:08 am So as you all know I've ditched the Alfa and picked up a .
Car Deets:
2019
Manual
White with Black wheels
Already ordered a the AWE Switch Path exhaust. I suspect I'll do simple bolt ons for now, tunes aren't yet available for the 19s and I like the long warranty.
Pics coming later. All the ones I have right now are the worst of the worst potato quality.
$530ish with shipping.[user not found] wrote: ↑Mon Jul 15, 2019 7:47 pmNotbad! What about just an AP?fledonfoot wrote: ↑Mon Jul 15, 2019 7:04 pm
I think my cost on that is in the 850 range plus shipping.
mang. I know you're used to super expensive parts on the alfa but intakes don't seem to make much sense on the Mk7. Especially since half of them just reuse the bottom of the stock intake box.[user not found] wrote: ↑Tue Jul 16, 2019 9:32 am I want an intake. For no reason.
Bleeder Block Install - do I need to flush clutch fluid as well (or will I lose some)?
I was looking at the AFE intake as it seems to be the only one that's moderately priced. It reuses the bottom of the stock box but you can also get a cover for it so it's not just a hot air intake.[user not found] wrote: ↑Tue Jul 16, 2019 9:37 amOh I'm totally aware it's pointless hahahaGberg2119 wrote: ↑Tue Jul 16, 2019 9:35 am
mang. I know you're used to super expensive parts on the alfa but intakes don't seem to make much sense on the Mk7. Especially since half of them just reuse the bottom of the stock intake box.
The only thing that seems like it'd help is a new duct portion of the intake to open up the driver side.
I have it but I took it to AWE for install. You don't need to flush the system, you'll just lose a little bit of fluid during the change. And obviously after it's installed you'll have to bleed it too.[user not found] wrote: ↑Tue Jul 16, 2019 9:54 amDid you do the bleeder block?Gberg2119 wrote: ↑Tue Jul 16, 2019 9:45 am
I was looking at the AFE intake as it seems to be the only one that's moderately priced. It reuses the bottom of the stock box but you can also get a cover for it so it's not just a hot air intake.
This thing from ECS seems like a good option. I just wish someone would make it in plastic at half the price.
https://www.ecstuning.com/b-ecs-parts/k ... 08ecs01kt/